Dear contributor,

Our automatic CI successfully passed with your patch(es). Please find some details below.

In binutils_build master-arm, after:
  | binutils patch https://patchwork.sourceware.org/patch/131802
  | Author: WANG Rui <r@hev.cc>
  | Date:   Mon Mar 16 22:20:41 2026 +0800
  | 
  |     [PATCH] ld: Disable separate code by default for Linux/x86
  |     
  |     Years ago, commit f6aec96dce1d ("ld: Add --enable-separate-code") introduced
  |     -z separate-code, mainly to avoid mixing code and data in the same segment
  |     for better cache performance, and enabled it by default for Linux/x86.
  | ... 51 lines of the commit log omitted.
  | ... applied on top of baseline commit:
  | 9cc83ec0ce9 gdb: remove TYPE_CHAIN

Produces Success:
  | Results changed to
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | 
  | From
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1

Used configuration :
 *CI config* tcwg_binutils_build master-arm
 *configure and test flags:* none, autodetected on armv8l-unknown-linux-gnueabihf

If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.

-----------------8<--------------------------8<--------------------------8<--------------------------

The information below contains the details of the failures, and the ways to reproduce a debug environment:

You can find the failure logs in
 * https://ci.linaro.org/job/tcwg_binutils_build--master-arm-precommit/4813/artifact/artifacts/artifacts.precommit/
The full lists of regressions and improvements as well as configure and make commands are in
 * https://ci.linaro.org/job/tcwg_binutils_build--master-arm-precommit/4813/artifact/artifacts/artifacts.precommit/notify/

Current build   : https://ci.linaro.org/job/tcwg_binutils_build--master-arm-precommit/4813/artifact/artifacts
Reference build : https://ci.linaro.org/job/tcwg_binutils_build--master-arm-build/3131/artifact/artifacts

Warning: we do not enable maintainer-mode nor automatically update
generated files, which may lead to failures if the patch modifies the
master files.