Dear contributor,

Our automatic CI successfully passed with your patch(es). Please find some details below.

In binutils_build master-arm, after:
  | binutils patch https://patchwork.sourceware.org/patch/131904
  | Author: Muhammad Kamran <Muhammad.Kamran@arm.com>
  | Date:   Wed Mar 18 13:49:57 2026 +0000
  | 
  |     [PATCH] aarch64: Reject no-Xt SYS aliases when Rt != 31 in disassembly
  |     
  |     For SYS-encoding aliases that do not take Xt (for example TLBI ALLE1,
  |     PLBI ALLE1), disassembly should not print the alias form when Rt != 31.
  |     In that case, disassemble as the generic sys form instead.
  | ... 18 lines of the commit log omitted.
  | ... applied on top of baseline commit:
  | 1ecd03b8901 Automatic date update in version.in

Produces Success:
  | Results changed to
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | 
  | From
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1

Used configuration :
 *CI config* tcwg_binutils_build master-arm
 *configure and test flags:* none, autodetected on armv8l-unknown-linux-gnueabihf

If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.

-----------------8<--------------------------8<--------------------------8<--------------------------

The information below contains the details of the failures, and the ways to reproduce a debug environment:

You can find the failure logs in
 * https://ci.linaro.org/job/tcwg_binutils_build--master-arm-precommit/4822/artifact/artifacts/artifacts.precommit/
The full lists of regressions and improvements as well as configure and make commands are in
 * https://ci.linaro.org/job/tcwg_binutils_build--master-arm-precommit/4822/artifact/artifacts/artifacts.precommit/notify/

Current build   : https://ci.linaro.org/job/tcwg_binutils_build--master-arm-precommit/4822/artifact/artifacts
Reference build : https://ci.linaro.org/job/tcwg_binutils_build--master-arm-build/3141/artifact/artifacts

Warning: we do not enable maintainer-mode nor automatically update
generated files, which may lead to failures if the patch modifies the
master files.