Dear contributor,

Our automatic CI successfully passed with your patch(es). Please find some details below.

In gdb_build master-arm, after:
  | gdb patch https://patchwork.sourceware.org/patch/130494
  | Author: Andrew Burgess <aburgess@redhat.com>
  | Date:   Mon Feb 23 14:34:09 2026 +0000
  | 
  |     [PATCH] gdb/riscv: use register number for 'info reg' output format choice
  |     
  |     On RISC-V the 'info register' format for floating point registers
  |     includes the raw register value printed as hex.  While reviewing an
  |     upstream patch[1] I realised that this raw hex output was no longer
  | ... 47 lines of the commit log omitted.
  | ... applied on top of baseline commit:
  | 2a2b24ecc13 gdb/python: remove some unreachable Py_RETURN_NONE

Produces Success:
  | Results changed to
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe gdb:
  | 1
  | 
  | From
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe gdb:
  | 1

Used configuration :
 *CI config* tcwg_gdb_build master-arm
 *configure and test flags:* none, autodetected on armv8l-unknown-linux-gnueabihf

If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.

-----------------8<--------------------------8<--------------------------8<--------------------------

The information below contains the details of the failures, and the ways to reproduce a debug environment:

You can find the failure logs in
 * https://ci.linaro.org/job/tcwg_gdb_build--master-arm-precommit/6956/artifact/artifacts/artifacts.precommit/
The full lists of regressions and improvements as well as configure and make commands are in
 * https://ci.linaro.org/job/tcwg_gdb_build--master-arm-precommit/6956/artifact/artifacts/artifacts.precommit/notify/

Current build   : https://ci.linaro.org/job/tcwg_gdb_build--master-arm-precommit/6956/artifact/artifacts
Reference build : https://ci.linaro.org/job/tcwg_gdb_build--master-arm-build/3042/artifact/artifacts

Warning: we do not enable maintainer-mode nor automatically update
generated files, which may lead to failures if the patch modifies the
master files.