Dear contributor,

Our automatic CI successfully passed with your patch(es). Please find some details below.

In  arm-eabi v7-a softfp, after:
  | 60 commits in binutils,gcc,gdb
  | 7db0fccae52 gdb, gdbserver: fix read/write_ptid types
  | ef706f09f1e gdb, remote: fix set_thread () in start_remote ()
  | 43ae0585aa4 gdbserver, read_ptid: handle '0' and '-1' thread ids
  | 7985f48ce57 gdb: build solib-svr4-linux.o when building for targets xtensa*-*-*linux*
  | 0b2fdd9b593 Automatic date update in version.in
  | ... and 5 more commits in binutils
  | 5deed65950e forwprop: restrict vector load decomposition in optimize_vector_load ()
  | b4a37c4b8ca GCC, meet C++20
  | edc821b60ce OpenMP/OpenACC tests. vs C++26
  | 65ee4bb8ec3 [x86] avoid using masked vector epilogues when no scalar epilog is needed
  | 9fa1c81f51a build: Check for ld -z compress-sections=zstd on Solaris
  | ... and 35 more commits in gcc
  | 7db0fccae52 gdb, gdbserver: fix read/write_ptid types
  | ef706f09f1e gdb, remote: fix set_thread () in start_remote ()
  | 43ae0585aa4 gdbserver, read_ptid: handle '0' and '-1' thread ids
  | 7985f48ce57 gdb: build solib-svr4-linux.o when building for targets xtensa*-*-*linux*
  | 0b2fdd9b593 Automatic date update in version.in
  | ... and 5 more commits in gdb

Produces Success:
  | Results changed to
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | # build_abe stage1 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=arm --set gcc_override_configure=--with-arch=armv7-a --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-float=softfp:
  | 2
  | # build_abe newlib:
  | 4
  | # build_abe stage2 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=arm --set gcc_override_configure=--with-arch=armv7-a --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-float=softfp:
  | 5
  | # build_abe gdb:
  | 6
  | # build_abe qemu:
  | 7
  | 
  | From
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | # build_abe stage1 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=arm --set gcc_override_configure=--with-arch=armv7-a --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-float=softfp:
  | 2
  | # build_abe newlib:
  | 4
  | # build_abe stage2 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=arm --set gcc_override_configure=--with-arch=armv7-a --set gcc_override_configure=--with-fpu=vfpv3-d16 --set gcc_override_configure=--with-float=softfp:
  | 5
  | # build_abe gdb:
  | 6
  | # build_abe qemu:
  | 7

Used configuration :
 *CI config* tcwg_gnu_embed_build arm-eabi -marm -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=softfp
 *configure and test flags:* --target arm-eabi --disable-multilib --with-mode=arm --with-arch=armv7-a --with-fpu=vfpv3-d16 --with-float=softfp --target_board=-marm/-march=armv7-a/-mfpu=vfpv3-d16/-mfloat-abi=softfp qemu_cpu=cortex-a9

If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.

-----------------8<--------------------------8<--------------------------8<--------------------------

The information below contains the details of the failures, and the ways to reproduce a debug environment:

You can find the failure logs in
 * https://ci.linaro.org/job/tcwg_gnu_embed_build--master-arm_v7a_softfp_eabi-build/343/artifact/artifacts/
The full lists of regressions and improvements as well as configure and make commands are in
 * https://ci.linaro.org/job/tcwg_gnu_embed_build--master-arm_v7a_softfp_eabi-build/343/artifact/artifacts/notify/

Current build   : https://ci.linaro.org/job/tcwg_gnu_embed_build--master-arm_v7a_softfp_eabi-build/343/artifact/artifacts
Reference build : https://ci.linaro.org/job/tcwg_gnu_embed_build--master-arm_v7a_softfp_eabi-build/342/artifact/artifacts