Dear contributor,

Our automatic CI successfully passed with your patch(es). Please find some details below.

In  arm-eabi cortex-m3 softfp, after:
  | baseline build

Produces Success:
  | Results changed to
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | # build_abe stage1 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-cpu=cortex-m3 --set gcc_override_configure=--with-float=softfp:
  | 2
  | # build_abe newlib:
  | 4
  | # build_abe stage2 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-cpu=cortex-m3 --set gcc_override_configure=--with-float=softfp:
  | 5
  | # build_abe gdb:
  | 6
  | # build_abe qemu:
  | 7
  | 
  | From
  | 

Used configuration :
 *CI config* tcwg_gnu_embed_build arm-eabi -mthumb -march=armv7-m -mtune=cortex-m3 -mfloat-abi=softfp -mfpu=auto
 *configure and test flags:* --target arm-eabi --disable-multilib --with-mode=thumb --with-cpu=cortex-m3 --with-float=softfp --target_board=-mthumb/-march=armv7-m/-mtune=cortex-m3/-mfloat-abi=softfp/-mfpu=auto qemu_cpu=cortex-m3

If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.

-----------------8<--------------------------8<--------------------------8<--------------------------

The information below contains the details of the failures, and the ways to reproduce a debug environment:

You can find the failure logs in
 * https://ci.linaro.org/job/tcwg_gnu_embed_build--master-thumb_m3_softfp_eabi-build/191/artifact/artifacts/
The full lists of regressions and improvements as well as configure and make commands are in
 * https://ci.linaro.org/job/tcwg_gnu_embed_build--master-thumb_m3_softfp_eabi-build/191/artifact/artifacts/notify/

Current build   : https://ci.linaro.org/job/tcwg_gnu_embed_build--master-thumb_m3_softfp_eabi-build/191/artifact/artifacts
Reference build : artifact/artifacts