Dear contributor,

Our automatic CI successfully passed with your patch(es). Please find some details below.

In  arm-eabi cortex-m7 hard, after:
  | 81 commits in binutils,gcc,gdb
  | 529b9a505a9 Automatic date update in version.in
  | 7b717d90fbd Fix configure rebuild
  | b691ce241e7 Fix binutils build on hppa64-hpux with gcc-16 (v3)
  | 3de6f35136f Automatic date update in version.in
  | 4928b0c0c3d gdb: use the pid from inferior in setup_inferior
  | ... and 10 more commits in binutils
  | 73c5fb047809 Daily bump.
  | 8e23a9982fa4 middle-end: Fix spurious -Walloc-size-larger-than warning during LTO [PR106409]
  | ffa98429b939 cprop_hardreg: Prevent copy propagation from a non-frame related insn to a frame related insn
  | 427ddf95eef8 Daily bump.
  | 94d8ce172848 final_cleanupcfg: Make sure TODO_cleanup_cfg is unset
  | ... and 46 more commits in gcc
  | 529b9a505a9 Automatic date update in version.in
  | 7b717d90fbd Fix configure rebuild
  | b691ce241e7 Fix binutils build on hppa64-hpux with gcc-16 (v3)
  | 3de6f35136f Automatic date update in version.in
  | 4928b0c0c3d gdb: use the pid from inferior in setup_inferior
  | ... and 10 more commits in gdb

Produces Success:
  | Results changed to
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | # build_abe stage1 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-cpu=cortex-m7 --set gcc_override_configure=--with-float=hard:
  | 2
  | # build_abe newlib:
  | 4
  | # build_abe stage2 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-cpu=cortex-m7 --set gcc_override_configure=--with-float=hard:
  | 5
  | # build_abe gdb:
  | 6
  | # build_abe qemu:
  | 7
  | 
  | From
  | # reset_artifacts:
  | -10
  | # true:
  | 0
  | # build_abe binutils:
  | 1
  | # build_abe stage1 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-cpu=cortex-m7 --set gcc_override_configure=--with-float=hard:
  | 2
  | # build_abe newlib:
  | 4
  | # build_abe stage2 -- --set gcc_override_configure=--disable-multilib --set gcc_override_configure=--with-mode=thumb --set gcc_override_configure=--with-cpu=cortex-m7 --set gcc_override_configure=--with-float=hard:
  | 5
  | # build_abe gdb:
  | 6
  | # build_abe qemu:
  | 7

Used configuration :
 *CI config* tcwg_gnu_embed_build arm-eabi -mthumb -march=armv7e-m+fp.dp -mtune=cortex-m7 -mfloat-abi=hard -mfpu=auto
 *configure and test flags:* --target arm-eabi --disable-multilib --with-mode=thumb --with-cpu=cortex-m7 --with-float=hard --target_board=-mthumb/-march=armv7e-m+fp.dp/-mtune=cortex-m7/-mfloat-abi=hard/-mfpu=auto qemu_cpu=cortex-m7

If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.

-----------------8<--------------------------8<--------------------------8<--------------------------

The information below contains the details of the failures, and the ways to reproduce a debug environment:

You can find the failure logs in
 * https://ci.linaro.org/job/tcwg_gnu_embed_build--master-thumb_m7_hard_eabi-build/194/artifact/artifacts/
The full lists of regressions and improvements as well as configure and make commands are in
 * https://ci.linaro.org/job/tcwg_gnu_embed_build--master-thumb_m7_hard_eabi-build/194/artifact/artifacts/notify/

Current build   : https://ci.linaro.org/job/tcwg_gnu_embed_build--master-thumb_m7_hard_eabi-build/194/artifact/artifacts
Reference build : https://ci.linaro.org/job/tcwg_gnu_embed_build--master-thumb_m7_hard_eabi-build/193/artifact/artifacts