Dear contributor,

Our automatic CI successfully passed with your patch(es). Please find some details below.

In  arm-eabi thumb v8-a hard, after:
  | 10 commits in gcc
  | 64d5e1eb97f libstdc++: Silence warning in mdspan.
  | 1cf9fda4936 amdgcn: Adjust failure mode for gfx908 USM
  | 64b22d699e1 c: Reject vector type bit-fields [PR123018]
  | cee0a9dd270 fold: Elide MASK_LEN_LOAD/STORE with zero length [PR122635].
  | a82f188449c optabs: Add else operand to LEN_LOAD.
  | ... and 5 more commits in gcc


Used configuration :
 *CI config* tcwg_gnu_embed_check_gcc arm-eabi -mthumb -march=armv8-a+simd -mfpu=auto -mfloat-abi=hard
 *configure and test flags:* --target arm-eabi --disable-multilib --with-mode=thumb --with-arch=armv8-a+simd --with-fpu=crypto-neon-fp-armv8 --with-float=hard --target_board=-mthumb/-march=armv8-a+simd/-mfpu=auto/-mfloat-abi=hard qemu_cpu=any

If you have any questions regarding this report, please ask on linaro-toolchain@lists.linaro.org mailing list.

-----------------8<--------------------------8<--------------------------8<--------------------------

The information below contains the details of the failures, and the ways to reproduce a debug environment:

You can find the failure logs in *.log.1.xz files in
 * https://ci.linaro.org/job/tcwg_gnu_embed_check_gcc--master-thumb_v8a_hard_eabi-build/1042/artifact/artifacts/00-sumfiles/
The full lists of regressions and improvements as well as configure and make commands are in
 * https://ci.linaro.org/job/tcwg_gnu_embed_check_gcc--master-thumb_v8a_hard_eabi-build/1042/artifact/artifacts/notify/
The list of [ignored] baseline and flaky failures are in
 * https://ci.linaro.org/job/tcwg_gnu_embed_check_gcc--master-thumb_v8a_hard_eabi-build/1042/artifact/artifacts/sumfiles/xfails.xfail

Current build   : https://ci.linaro.org/job/tcwg_gnu_embed_check_gcc--master-thumb_v8a_hard_eabi-build/1042/artifact/artifacts
Reference build : https://ci.linaro.org/job/tcwg_gnu_embed_check_gcc--master-thumb_v8a_hard_eabi-build/1039/artifact/artifacts